To Avoid Explosion: See How to Detect a Gas Leak in Your Home

How to Detect a Gas Leak in Your Home – Gas Leak Soap Bubbles

the soapy water leak test allows for tell-tale gas leak soap bubbles that are indicative of a gas leak. You just coat all of the gas transmission gear (pipes, hoses & valves) with soapy water and then pressurise the system. If you see gas leak soap bubbles or smell rotten eggs, you know you have a leak.

It is important to know how do you check for gas cylinder leaks and regularly leak test your BBQ gas bottle (LPG gas cylinder), regulator and hose using the soap bubble test for gas leak.

Leaks from these items are frequently the cause of BBQ gas fires.

How to Detect LPG Gas Leakage

Using your nose is the first step to detect LPG gas leakage. The first hint would be the smell of rotten cabbage or rotten eggs. An odourant – Ethyl Mercaptan – is added to the naturally odourless LPG for the aid in detection of leaks.

Soap Test for Gas Leak – Gas Leak Detector Soapy Water

Apply soapy water to the entire hose assembly, including the tank’s valve and regulator, using a spray bottle or sponge. Pressurise the system without turning on any appliances. If you see bubbles or smell rotten eggs, you have a leak.

How Do You Check for Gas Cylinder Leaks & for Natural Gas Leaks? Soapy Water Leak Test

It is important to how do you check for gas cylinder leaks and for natural gas. One of the safest ways is something commonly called the “soapy water leak test” or soap bubble test for gas leak.

The soapy water leak test allows you to search for tell-tale bubbles that are indicative of LPG or Natural Gas leakage.

In this very simple test, you just coat all of the gas transmission gear (pipes, hoses, valves, etc.) with soapy water and then pressurise the system.

the soap test for gas leak.

Liquid laundry detergent doesn’t work as well as dish soap, as it is formulated to be low sudsing.

Remember to cover the entire hose assembly from the gas bottle valve to the hose attachment to the BBQ or heater with soap solution. Open the valve to pressurise the system, without turning on the burners, and look for soap bubbles or sniff for the rotten egg smell.

How to Do Soapy Water Leak Test – How to Detect a Gas Leak in Your Home

BBQ Gas Leak Test

1 To detect a gas leak in your home, start by putting some soapy water in a spray bottle or a dish.

2 Turn on the LPG gas bottle without turning on the BBQ. This pressurises the system.

3 Next, spray the entire valve, regulator and hose assembly with the soapy water.

4 Alternatively, you can apply the soapy water with a paint brush, basting brush or it can even be sponged on.

5 Soap bubbles will form if there is a gas leak and you may also smell the gas.

6 You need to test the entire assembly from the gas bottle valve all the way to where the gas hose attaches to the BBQ.

7 When done, rinse with clean water to remove the soap solution.

8 Remember to always soapy water leak test the lot every time you re-connect your gas bottle.

If you find a leak, turn off the gas bottle immediately!

Do not turn back on or attempt to use the BBQ until the problem is rectified.